Autodesk Fusion 360 Vs Inventor Full Comparison 2024: Which Is Better?

There is various CAD software in the market and Autodesk provides a few. That’s why many users are confused between Autodesk Fusion 360 vs Inventor to know which one is better. Both of them are the best software that provides amazing.3D and 2D designs. That’s why it is a bit confusing for the users to choose which one is better. So today in this blog we will do a complete comparison between Autodesk Inventor vs Fusion 360 in 2024.

60% Off Fusion 360 Discount Code 2024

Grab Fusion 360 coupon code to get 60% discount.

Get Offer

What Is Autodesk Fusion 360 And Inventor?

Autodesk Inventor and Fusion 360 of them are widely popular CAD, CAM, and CAE software. Autodesk develops that and is mostly used by engineers and manufacturers. Autodesk Fusion and Inventor both of them help you to create 3D designs and manage your data they also provide you options to run simulations to show your designs.

Difference Between Autodesk Fusion 360 Vs Inventor: Quick Comparison

If you are in a hurry then you can look at the Autodesk Inventor vs Fusion 360 quick table comparison that we mentioned below.

Difference Between Autodesk Inventor Vs Fusion 360: Detail Comparison

Now let’s come to the main thing what are the differences between Autodesk Fusion 360 or Inventor? As we mentioned above both of them perform well in their places and offer various useful features. That’s why here we compare both of the on the basis of major factors to know which one is best.

User Interface Between Autodesk Fusion 360 Vs Inventor

In UI comparison between Autodesk Inventor vs Fusion 360 both of them lie in the same boat.

Autodesk Fusion 360 is one of the best options when it comes to the learning curve as it has a very easy-to-use interface. This 3D design software comes with an effortless interface where all the important tools are available on the main interface. It gives you lighter-colored themes that can make it too easy for you to use Fusion 360.

On the other side, when it comes to Inventor then it also gives you an intuitive interface that is very easy to learn for everyone. They also give you light colored theme with the latest updated features. Autodesk Inventor has a search toolbar where you can find other useful tools of Inventor.

Simulation Between Autodesk Fusion 360 Vs Inventor

Fusion 360 performs well when it comes to the simulation between Fusion 360 vs Inventor.

Fusion 360 comes with amazing simulation features that will help you to analyze the design. Through this, you can analyze both the linear and non-linear stress of an object. In Fusion 360 they give you digital simulation features and also you can analyze the environmental aspects of the design such as shadows, modal frequency, and many more.

When it comes to the Inventor then it also gives you various options to simulate or validate your design. They provide you with the dynamic simulation through this you can check the speed, motion, and acceleration of your designs. Just like Fusion 360 Inventor also provides you stress analysis to check the thermal and other stress of the designs.

Rendering Between Autodesk Inventor Vs Fusion 360

When it comes to Autodesk Fusion 360 vs Inventor in Rendering then Inventor beats Autodesk Fusion 360.

Fusion 360 is one of the 2D and 3D rendering CAD software. That gives you the option to create various realistic images from various angles. So you can view your design and analyze it briefly. Also, Fusion 360 gives you the Cloud option to easily save and share images. 

But when we talked about Inventor then we get a slight change as Inventor is a more powerful and feature-full software as compared to Fusion 360. You can view a photorealistic image of your design with or without background enhancement. The inventor also gives you the option to edit or show a details view so you can even look at the shadows of your design,

3D Modelling Between Fusion Vs Inventor

Inventor is the winner when it comes to the 3D Modeling factor between Autodesk Inventor vs Fusion 360.

Fusion 360 offers you many types of modeling like surface, parametric, mesh freeform and direct modeling. Fusion gives you history or non-history-based modeling and provides creation like sheet metal parts.In the end Autodesk Inventor is the winner of this Autodesk Fusion 360 vs Inventor as it has many amazing features as compared to Inventor.

One of the major benefits between them is Fusion 360 is designed for consumer product designs. Where Inventor is designed for the mechanical design, visualization, documentation, and simulation for complex designs.

Also, Inventor is one of the best CAD software for beginners as it h On the flip side when we look at Inventor then we see that Inventor is quite amazing and advanced as compared to Fusion 360.

In Inventor, you can get various option for modeling that is very advanced and fantastic. So you can make an Impressive design and analyze them.

Customer Support Between Fusion 360 Vs Autodesk Inventor

Well, both of them are products of Autodesk that’s why both of them provide impressive customer support.

As we know both are the products of Autodesk that’s why they have similar customer support. Which is quite impressive as they are available for their customers all the time. They provide you with official forums of Autodesk where you can discuss your issues and solve other users’ queries. They also provide you with various blogs that will help you to use Autodesk Fusion 360 and Inventor for amazing designs. Also, you can go for Fusion 360 vs Onshape to choose the best one for yourself.

Compatibility Of Autodesk Inventor Vs Fusion 360

In compatibility features between Autodesk Fusion 360 vs Inventor. Autodesk Fusion 360 is far better than Inventor as it is available for Windows and macOS both.

Autodesk Fusion 360 System Requirements:

Let’s take a look at the Fusion 360 system requirements that you have to meet to use this Autodesk Fusion 360 on your operating system.

• Operating system: macOS 12 Monterey, 11 Big Sur, 10.15.7, or newer, Windows 8.1 (until January 2023), 10 (64-bit), and 11
• CPU: x86-based, 64-bit processor, 4 cores at 1.7 GHz or better; ARM-based processors partially supported via Rosetta 2
• Memory: 4 GB RAM
• Storage: 3 GB hard disk space
• Internet: 2.5 Mbps or faster download speed; 500 Kbps or faster upload speed
• Graphics: DirectX 11 with Direct3D 10.1 or greater GPU required; dedicate

So now you have understand about the system requirements of this software. You can purchase any CPU for Fusion 360 that met with the requirements.

Autodesk Inventor System Requirements:

Inventor has various system requirements that you should look to work smoothly on your device.

• Operating system: Windows 10 (64-bit)
• CPU: 2.5 GHz required, 3.0 GHz recommended; 4 or more
• Memory: 16 GB RAM required, 32 GB or more recommended
• Storage: 40 GB hard disk space
• Internet: Connection required for installation from the web
• Graphics: DirectX 11 GPU required; GPU with 1 GB VRAM required, GPU with 4 GB VRAM recommended

Pros And Cons Of Autodesk Fusion 360 Vs Inventor

We all know that every software has good and bad sides that’s why here we discuss the advantages and disadvantages of Fusion 360 vs Inventor you should know. So you can choose any one of them that is suitable for you according to your need.

Fusion 360 Pros & Cons

Inventor Pros & Cons

Price Comparison Of Autodesk Inventor Vs Fusion 360

In the pricing comparison of Autodesk Fusion vs Inventor, Inventor is far better than Autodesk Fusion 360. 

Now let’s come to the prices of Autodesk Fusion 360 vs Inventor to know how much they cost. Both of them provide amazing features at a reasonable price. So let’s take look at the price first. 

Price Fusion 360

Fusion 360 comes with basic pricing of  $70 per month and gives you various plan options for monthly, yearly, and 3-year plans. Fusion 360 also gives you a 30-day money-back guarantee trial. So you can take your money back if you don’t like their product.

• Fusion 360 Monthly Plan: $70
• Fusion 360 Yearly Plan: $545
• Fusion 360 3-Year Plan: $1555

They provide this software with a student or educator license, personal license, and startup license also. So if you are a student or hobbyist then you can get this license to use Fusion 360. Also, you can use Autodesk Fusion 360 discount code to save an immense amount of money. That’s why when it comes to Autodesk Inventor Fusion 360 then Fusion is quite affordable. If you are a german user then you can use this Autodesk gutscheincode for a huge discount on your purchase.

Also, if you purchase with Fusion360 Black Friday then you can get upto a 25% discount on it and make your purchase at the cheapest price.

Price Inventor

The Autodesk Inventor costs you around $290 per month As we said above Inventor is quite expensive as compared to Fusion 360 as you’ll get many advanced features. Autodesk inventor also gives you monthly, yearly, and 3-year plan options. So you can choose any of them that is suitable for you.

• Inventor Monthly price: $290
• Inventor Yearly price: $2,300
• Inventor 3-year price: $6,555

Inventor provides you 30 days free trial and also gives you options for educator and student license. It means you can use or test this software free for 30 days after that you have to purchase their subscription. Also, you can get a 40% discount on Inventor by using the Autodesk Inventor discount code while purchasing.

Conclusion: Autodesk Fusion 360 Vs Inventor

In the end Autodesk Inventor is the winner of this Autodesk Inventor vs Fusion 360 as it has many amazing features as compared to Inventor. One of the major benefits between them is Fusion 360 is designed for consumer product designs. Where Inventor is designed for the mechanical design, visualization, documentation, and simulation of complex designs. Inventor is one of the best CAD software for beginners as it has a very easy-to-use interface. That’s why going with the Inventor can be a great option for you. Also, you can check out Fusion 360 vs Solidwork to know which one is better.

Is Fusion 360 And Inventor Good For Engineering?

yes, both of them are the best CAD software 3D design software that gives you an amazing simulation of your design. That’s why Fusion 360 and Inventor are the best choice when it comes to engineering.

Is Fusion 360 Still Free For Hobbyists 2024?

Yes, Autodesk Fusion 360 for Hobbyists is free for qualifying non-commercial users with a 3-year subscription.